For the 1983 Volvo 244 with the 2.4L 6-cylinder D24 diesel engine, the oil capacity is 7 quarts when performing a change with a filter. Recommended viscosities include 15W-40 for temperatures above -18°C, 10W-30 for temperatures between -25 to 20°C, and 5W-30 for temperatures below 16°C. AMSOIL recommends using Signature Series 15W-40 Max-Duty Diesel Oil paired with an AMSOIL Oil Filter (EAO15-EA).
What oil does a 1983 Volvo 244 2.4L Diesel take?
The engine requires an oil with a CF grade specification. Depending on your ambient operating temperatures, you should select the appropriate viscosity: 5W-30 for environments below 16°C, 10W-30 for temperatures between -25 to 20°C, and 15W-40 for temperatures above -18°C.
AMSOIL product recommendations
The following AMSOIL products are specifically listed for the 1983 Volvo 244 2.4L Diesel engine to assist with routine maintenance and performance protection.
Engine Oil Options
| Product Name | Code |
|---|---|
| AMSOIL Signature Series 15W-40 100% Synthetic Max-Duty Diesel Oil | DMEQT-EA |
| AMSOIL 15W-40 Heavy-Duty 100% Synthetic Diesel Oil | ADPQT-EA |
Oil Filter Options
| Product Name | Code |
|---|---|
| AMSOIL Oil Filter | EAO15-EA |
| WIX Oil Filter | 51515-EA |
| MANN-FILTERS Oil Filter | W94025-EA |
| AMSOIL product (Mann Filter variant) | HU821X-EA |
Coolant & Transmission Fluids
| Product Name | Code |
|---|---|
| AMSOIL Passenger Car & Light Truck Antifreeze & Coolant | ANTPC1G-EA |
| AMSOIL Propylene Glycol Antifreeze and Engine Coolant | ANT1G-EA |
| AMSOIL Super Shift® Racing Transmission Fluid | ARTQT-EA |
Engine Oil Specifications
| Viscosity Range | Temperature Condition |
|---|---|
| 5W-30 | Below 16°C |
| 10W-30 | -25 to 20°C |
| 15W-40 | Above -18°C |
Oil Grade: CF
How much oil does it take with a filter change?
The total capacity for the 2.4L 6-cylinder D24 engine is 7 quarts when including the replacement of the oil filter. It is essential to check the oil level after refilling to ensure proper lubrication.
Diesel maintenance notes for this vehicle
Maintaining a vintage mechanical diesel requires attention to several key areas:
- Filtration: Use high-quality filters like the EAO15-EA to ensure 99 percent filtering efficiency at 20 microns.
- Cooling System: Regular inspection of rubber hoses and seals is recommended due to the age of these vehicles.
- Fuel Integrity: Given the mechanical injection system, maintaining fuel system integrity is a primary maintenance focus.
Common diesel oil-related concerns and how AMSOIL products may help
| Concern | Why it matters | AMSOIL product from this lookup | How it may help | Important limitation |
|---|---|---|---|---|
| Engine Wear | Mechanical components require constant lubrication to prevent damage. | DMEQT-EA | Delivers up to 6X more wear protection. | Requires regular oil changes. |
| Extreme Temperatures | Viscosity changes can affect lubrication during cold starts or high heat. | ADPQT-EA | Excels in extreme temperatures. | Must match viscosity to ambient temp. |
| Contaminants | Small particles can cause abrasive wear in diesel engines. | EAO15-EA | Provides greater capacity for small, wear-causing contaminants. | Filter must be replaced at intervals. |
Common maintenance concerns for this vehicle
Owners of the 1983 Volvo 244 diesel should consider the following practical checks:
- Cooling System Efficiency: Monitor for leaks in hoses and gaskets to prevent overheating.
- Mechanical Injection Components: Inspect fuel system integrity and seals regularly.
- Electrical Wiring: While not a fluid issue, older vehicles may have aging wiring harnesses that require inspection.
Recall, TSB, and manufacturer communication notes
Official NHTSA recall research for the 1983 Volvo 244 returned no recall records. However, owners should always verify open recalls by VIN, as applicability depends on production date and specific equipment. One NHTSA complaint was noted regarding an electrical system issue (cracked/frayed wiring harness), which is an owner report and not a verified defect.
About this vehicle
The 1983 Volvo 244 is a representative of the highly successful Volvo 200 Series, a range of mid-size cars produced between 1974 and 1993. This specific model belongs to the 240 designation, which was part of a lineage known for establishing Volvo’s global reputation for safety and durability. Because these vehicles were engineered with a focus on longevity, many remain in service decades after their initial production.
This vehicle is equipped with a 2.4L 6-cylinder diesel engine (Engine Code: 7 D24 77 8). Owners of this vintage diesel should treat it as part of the classic Volvo diesel era, which predates modern common-rail systems and focuses on robust, mechanical diesel technology. Maintenance typically revolves around managing the aging components of a mechanical injection system, including fuel system integrity, cooling system efficiency, and timing belt intervals.
Given the age of these vehicles, regular inspection of rubber hoses, seals, and heavy-duty filtration is essential to maintain the reliability for which the 200 Series is known. Note that modern Volvo Engine Architecture (VEA) does not apply to this 1983 model.
Common questions about this vehicle’s diesel oil and maintenance
What is the correct oil viscosity for my D24 engine?
The choice depends on your climate: use 5W-30 below 16°C, 10W-30 between -25 to 20°C, or 15W-40 above -18°C. The AMSOIL lookup lists DMEQT-EA as a high-performance option.
How often can I change my oil?
While specific intervals depend on driving conditions, AMSOIL products like the Signature Series are designed to confidently extend drain intervals compared to conventional oils.
Does this vehicle require synthetic oil?
The AMSOIL lookup lists several 100% synthetic options, such as ADPQT-EA, which can provide superior wear protection and temperature stability for older diesel engines.
What should I look for in an oil filter?
Look for high filtering efficiency. The EAO15-EA filter provides 99 percent efficiency at 20 microns and helps reduce engine wear.
Can I use any antifreeze in my Volvo?
For this application, AMSOIL lists ANTPC1G-EA, which is compatible with all other antifreeze and coolant colors.
How do I check for recalls on my 1983 Volvo?
You should verify open recalls by your specific VIN through official manufacturer channels or the NHTSA website to ensure accuracy regarding your specific production date and equipment.
Disclaimer: Not all information provided is verified by the manufacturer. Always consult your vehicle’s owner manual or a professional mechanic before performing maintenance.