What oil does a 2008 Ford E450 Van 6.0L Diesel Turbo take?
For the 2008 Ford E450 Van with the 6.0L 8-cyl Engine Code [P] P Diesel Turbo, the engine requires a capacity of 15 quarts with a filter change. Recommended viscosities include 15W-40 for temperatures above -12°C (11°F), or 10W-30 for operating temperatures between -23°C and 32°C. AMSOIL recommends using Signature Series 15W-40 Max-Duty Diesel Oil or Heavy-Duty 100% Synthetic Diesel Oil.
AMSOIL product recommendations
The following AMSOIL products are recommended for your 2008 Ford E450 Van 6.0L Diesel Turbo based on the available application data.
Engine Oil Options
| Product Name | Part Code |
|---|---|
| AMSOIL Signature Series 15W-40 100% Synthetic Max-Duty Diesel Oil | DMEQT-EA |
| AMSOIL 15W-40 Heavy-Duty 100% Synthetic Diesel Oil | ADPQT-EA |
Oil Filter Options
| Product Name | Part Code |
|---|---|
| AMSOIL Oil Filter | EA15K88-EA |
| AMSOIL SDF88 Oil Filter (Designed for Ford 6.0/6.4L) | SDF88-EA |
Coolant & Transmission Fluids
| Product Name | Part Code |
|---|---|
| AMSOIL Passenger Car & Light Truck Antifreeze & Coolant | ANTPC1G-EA |
| AMSOIL Propylene Glycol Antifreeze and Engine Coolant | ANT1G-EA |
| AMSOIL Signature Series Fuel-Efficient 100% Synthetic ATF | ATLPK-EA |
| AMSOIL OE Fuel-Efficient 100% Synthetic ATF | OTLQT-EA |
Engine Oil Specifications & Details
Proper lubrication is critical for the 6.0L Power Stroke diesel engine to ensure longevity and performance under heavy loads.
Oil Viscosity Guide
| Temperature Range | Recommended Viscosity |
|---|---|
| Above -12°C (11°F) | 15W-40 |
| -23°C to 32°C | 10W-30 |
| Below -18°C | 0W-30 |
Note: Ford TSB 05-16-6 states that these viscosities are acceptable within the specified temperature ranges. SAE 15W-40 is the preferred viscosity if operating temperatures are above -1°C (31°F).
Engine Oil Capacity & Torque
| Specification | Value |
|---|---|
| Oil Capacity (with filter) | 15 quarts |
| Oil Drain Plug Torque | 32 ft/lbs |
After refilling, always check the oil level.
Manufacturer Specification Notes
The AMSOIL lookup note references Ford Material Engineering Specification WSS-M2C171-F1 for this application. When the CK-4 standard was introduced in 2016, Ford superseded the original WSS-M2C171-D recommendation with WSS-M2C171-F1. Ford continues to recommend oils meeting WSS-M2C171-F1 for older diesel engines, including the 6.0L, as testing on some CK-4 formulations showed inadequate wear protection compared to earlier CJ-4 formulations.
Diesel maintenance notes for this vehicle
Maintaining a 6.0L Power Stroke requires attention to specific high-pressure systems. Owners should prioritize the following:
- Fuel Filtration: Essential for protecting diesel injectors and common rail components.
- Cooling System Integrity: Critical for preventing overheating in heavy-duty applications.
- Turbocharger Inspection: Regular checks of the turbo system are recommended for diesel powertrains.
Common diesel oil-related concerns and how AMSOIL products may help
| Concern | Why it matters | AMSOIL Product | How it may help | Limitation |
|---|---|---|---|---|
| Engine Wear | High-pressure diesel environments cause friction. | DMEQT-EA | Delivers up to 6X more wear protection. | Requires regular oil changes. |
| Soot & Contaminants | Diesel combustion produces soot that can degrade oil. | EA15K88-EA | 99% filtering efficiency at 20 microns. | Filter must be replaced per interval. |
| Extreme Temperatures | Fluctuating temps affect viscosity and protection. | ADPQT-EA | Excels in extreme temperatures. | Follow viscosity guide for ambient temp. |
Common maintenance concerns for this vehicle
While specific mechanical defects are not listed in the provided research, owners of E450 chassis vehicles used for heavy-duty hauling or commercial transport should focus on:
- Heavy-Duty Load Stress: Routine maintenance is critical to prevent downtime during high-load operations.
- Cooling System Maintenance: Ensuring the coolant (such as ANTPC1G-EA) is fresh to protect all cooling system metals and gaskets.
Recall, TSB, and manufacturer communication notes
Official NHTSA recall research for the 2008 Ford E450 Van returned no recall records at this time. However, owners should always verify open recalls by VIN, as applicability depends on production date and specific equipment. Regarding Technical Service Bulletins (TSB), Ford TSB 05-16-6 is noted regarding acceptable oil viscosities for varying operating temperatures.
About this vehicle
The 2008 Ford E450 is a prominent member of the Ford E-Series family, which has historically served both retail and commercial markets. This model is commonly associated with heavy-duty applications, such as cutaway chassis used for minibuses, shuttle buses, or specialized utility vehicles. Because these vehicles are often utilized in high-load or commercial environments, routine maintenance is vital to ensure reliability.
This specific vehicle features the 6.0L Power Stroke diesel engine. It is important to distinguish this from the Ford Modular gasoline engine family; the 6.0L Power Stroke belongs to a distinct diesel lineage with unique requirements. Maintenance for this powertrain should focus on high-pressure common rail or turbo-diesel system needs, including fuel filtration and cooling system integrity. As these vehicles are often used in demanding roles, maintaining proper lubrication through high-quality synthetic oils can help support engine longevity.
Common questions about this vehicle’s diesel oil and maintenance
How much oil does my 6.0L Ford E450 take?
The 6.0L diesel engine requires 15 quarts of oil when performing a service that includes the oil filter.
What is the best oil viscosity for my diesel van?
According to Ford TSB 05-16-6, SAE 15W-40 is the preferred viscosity for operating temperatures above -1°C (31°F). For colder climates, 10W-30 or 0W-30 may be used depending on the specific temperature range.
Can I use CK-4 oil in my 2008 E450?
The AMSOIL lookup note states that Ford recommends meeting the WSS-M2C171-F1 specification for older diesel engines like the 6.0L, rather than standard CK-4 oils, to ensure adequate wear protection.
What oil filter is designed specifically for my engine?
The AMSOIL SDF88-EA is designed specifically for Ford 6.0/6.4L diesel engines and replaces OE part FL2016.
How often should I change my coolant?
While specific intervals vary, AMSOIL products like ANTPC1G-EA are engineered to provide protection for up to 150,000 miles or 5 years.
How do I check for open recalls on my Ford E450?
Owners should verify current recalls by checking their specific VIN through official manufacturer channels or the NHTSA website, as recall applicability can depend on production date and equipment.
Disclaimer: Not all information provided is from a single source. Always consult your owner’s manual or a certified service professional for exact capacities and specifications before performing maintenance.