For the 2010 Ford E350 Van equipped with the 6.0L 8-cylinder Diesel Turbo (Engine Code P), the engine oil capacity is 15 quarts (including filter replacement). Recommended viscosities include 10W-30 for temperatures between -18 to 10°C, and 5W-40 or 15W-40 for heavy-duty driving and trailer towing. AMSOIL recommends the Signature Series 5W-40 Max-Duty Diesel Oil paired with the SDF88 Oil Filter for optimal protection.
What oil does a 2010 Ford E350 6.0L Diesel take?
The 2010 Ford E350 with the 6.0L diesel engine requires specific viscosities based on ambient temperature and driving conditions. For temperatures below 10°C, 0W-30 or 0W-40 is appropriate. Between -18 to 10°C, use 10W-30. For temperatures above -7°C, 15W-40 is standard, but 5W-40 or 15W-40 must be used for heavy-duty driving and trailer towing.
AMSOIL product recommendations
Based on the specific requirements of the Ford 6.0L Power Stroke diesel engine, AMSOIL provides several high-performance lubrication and filtration options to support heavy-duty operation and extended service life.
Engine Oil Recommendations
| Product Name | Viscosity | Part Code |
|---|---|---|
| AMSOIL Signature Series Max-Duty Diesel Oil | 10W-30 | DTTQT-EA |
| AMSOIL Signature Series Max-Duty Diesel Oil | 5W-40 | DEOQT-EA |
| AMSOIL Heavy-Duty Synthetic Diesel Oil | 10W-30 | ADNQT-EA |
| AMSOIL Heavy-Duty Synthetic Diesel Oil | 5W-40 | ADOQT-EA |
Oil Filter Recommendations
| Product Name | Part Code |
|---|---|
| AMSOIL Oil Filter (Fits OE Cap) | EA15K88-EA |
| AMSOIL SDF88 Oil Filter (Designed for 6.0/6.4L) | SDF88-EA |
Other Essential Fluids
| Component | AMSOIL Product | Part Code |
|---|---|---|
| Coolant | Passenger Car & Light Truck Antifreeze | ANTPC1G-EA |
| Coolant (Concentrated) | Propylene Glycol Antifreeze | ANT1G-EA |
| Transmission Fluid | Signature Series Fuel-Efficient ATF | ATLPK-EA |
| Transmission Fluid | OE Fuel-Efficient ATF | OTLQT-EA |
Engine Oil Specifications & Details
The AMSOIL lookup note references Ford Material Engineering Specification WSS-M2C171-F1. It notes that Ford recommends this specification over the CK-4 standard for older diesel engines like the 6.0L to provide additional wear protection.
| Specification | Details |
|---|---|
| Oil Grade | SEO84 |
| Capacity | 15 quarts (with filter) |
| Drain Plug Torque | 32 ft/lbs |
Note: Always check the oil level after refilling.
How much oil does it take with a filter change?
A complete oil and filter service for the 2010 Ford E350 6.0L Diesel requires 15 quarts of engine oil. This capacity includes the volume held within the oil filter. It is critical to verify the oil level on the dipstick after the refill is completed to ensure accuracy.
Diesel maintenance notes for this vehicle
Maintaining a 6.0L Power Stroke requires attention to specific diesel-related components. Owners should prioritize fuel system integrity, turbocharger health, and heavy-duty cooling system management. Because these vehicles are often used in commercial or high-load capacities, regular inspection of the drivetrain is essential.
- Oil Filtration: High-quality filtration is necessary to prevent soot buildup common in diesel engines.
- Towing Requirements: If towing trailers or performing heavy-duty work, ensure you are using 5W-40 or 15W-40 viscosity as recommended by the manufacturer.
- Cooling System: The cooling system capacity is approximately 27.5 quarts.
Common diesel oil-related concerns and how AMSOIL products may help
Diesel engines face unique stresses including soot loading and high thermal demands. The following table outlines how specific AMSOIL products can support your maintenance routine.
| Concern | Why it matters | AMSOIL Product | How it may help | Limitation |
|---|---|---|---|---|
| Soot & Contaminants | Can cause engine wear and sludge. | SDF88 Filter | Provides 99% efficiency at 20 microns. | Requires regular replacement. |
| Heavy Towing/Heat | Increases oil oxidation and stress. | Signature Series 5W-40 | Maintains proper viscosity under load. | Does not repair mechanical damage. |
| Cold Starts | Increases wear during startup. | Signature Series 10W-30 | Excels in extreme temperatures. | Viscosity must match ambient temp. |
Recall, TSB, and manufacturer communication notes
Official NHTSA recall research for the 2010 Ford E350 Van returned no recall records at this time. However, owners should always verify open recalls by VIN, as applicability depends on production date, trim, and specific equipment. No official complaint records were found in the NHTSA database for this specific model year during this search.
About this vehicle
The 2010 Ford E350 is a member of the long-running Ford E-Series family, which has been a staple in both retail and commercial markets since 1961. Often referred to as the Econoline or Club Wagon, these vehicles are frequently utilized for heavy-duty applications, including cargo transport and chassis configurations for various utility uses.
This specific model is equipped with the 6.0L Power Stroke diesel engine. It is important to distinguish this powertrain from Ford’s gasoline Modular engine family; the 6.0L is a distinct diesel architecture that requires specialized maintenance. Because the E-Series is commonly used for high-load or commercial purposes, owners often research maintenance tasks unique to turbo-diesel engines, such as fuel system integrity and turbocharger health. Given the heavy-duty nature of these vehicles, maintaining proper lubrication through high-quality oil filtration and correct viscosity selection is a key part of long-term ownership.
Common questions about this vehicle’s diesel oil and maintenance
What is the oil capacity for my 2010 Ford E350 6.0L?
The engine requires 15 quarts of oil when performing a service that includes a filter change.
Which AMSOIL oil is best for towing with an E350?
For heavy-duty driving and trailer towing, the AMSOIL lookup recommends using 5W-40 or 15W-40 viscosity. The Signature Series 5W-40 is a highly rated option for these conditions.
What torque spec should I use for the oil drain plug?
The oil drain plug for this vehicle should be torqued to 32 ft/lbs.
Does my E350 have any active recalls?
NHTSA research returned no recall records for this model, but you should always verify your specific VIN with a dealer or the NHTSA website.
Can I use standard gasoline motor oil in my 6.0L diesel?
No, diesel engines require specialized oils like AMSOIL’s Max-Duty Diesel series to handle soot and high compression loads. The lookup notes that Ford recommends meeting the WSS-M2C171-F1 specification for these engines.
What filter replaces the Ford FL2016?
The AMSOIL SDF88 Oil Filter is designed specifically for Ford 6.0/6.4L diesel engines and replaces the Ford FL2016.
Disclaimer: Not all information provided has been verified by the manufacturer. Always consult your owner’s manual or a certified service guide before performing maintenance.