For the 2015 Ford F-250 HD Pickup with the 6.7L 8-cylinder Diesel Turbo engine (Engine Code [T]), the oil capacity is 13.1 quarts with a filter change. Recommended viscosity depends on operating temperatures: 10W-30 is recommended for normal usage, while 5W-40 is suggested for severe operations or when using biodiesel blends (up to B20). AMSOIL recommends Signature Series 5W-40 Max-Duty Diesel Oil and the AMSOIL Oil Filter (EAO98-EA) for high-performance protection.
What oil does a 2015 Ford F-250 HD 6.7L Diesel take?
The required viscosity for your 6.7L Power Stroke diesel depends on environmental conditions and fuel type. For normal usage, the manufacturer recommends 10W-30. However, for severe operations or if you are using biodiesel blends (up to B20), a 5W-40 or 15W-40 viscosity is recommended. The AMSOIL lookup note references Ford specification WSS-M2C171-F1 for this application.
The total oil capacity for the 6.7L 8-cylinder engine is 13.1 quarts when performing an oil change that includes a new filter. It is important to check the oil level after refilling to ensure proper lubrication.
AMSOIL product recommendations
The following AMSOIL products are specifically listed for the 2015 Ford F-250 HD with the 6.7L Diesel Turbo engine to assist with maintenance and performance.
Engine Oil Options
| Product Name | Viscosity | Part Number |
|---|---|---|
| AMSOIL Signature Series Max-Duty Diesel Oil | 5W-40 | DEOQT-EA |
| AMSOIL Signature Series Max-Duty Diesel Oil | 10W-30 | DTTQT-EA |
| AMSOIL Heavy-Duty Synthetic Diesel Oil | 5W-40 | ADOQT-EA |
| AMSOIL Heavy-Duty Synthetic Diesel Oil | 10W-30 | ADNQT-EA |
Oil Filter Options
Air Filter Options
| Product Name | Part Number |
|---|---|
| WIX Air Filter | 49902-EA |
| Donaldson P-Series Heavy Duty Air Filters | P621023-EA |
Coolant & Antifreeze
| Product Name | Part Number |
|---|---|
| AMSOIL Passenger Car & Light Truck Antifreeze & Coolant | ANTPC1G-EA |
| AMSOIL Propylene Glycol Antifreeze and Engine Coolant | Not confirmed from source data |
Engine Oil Specifications
| Detail | Value |
|---|---|
| Oil Capacity (with filter) | 13.1 quarts |
| Oil Drain Plug Torque | 19 ft/lbs |
| AMSOIL lookup oil grade | SEO84 |
Manufacturer Specification Note: The AMSOIL lookup note references Ford specification WSS-M2C171-F1. Ford has indicated that this specification includes additional requirements beyond CK-4 to provide enhanced wear protection for the 6.7L diesel engine.
Engine Oil Viscosity Guide
| Temperature Range | Recommended Viscosity |
|---|---|
| Below 10°C | 0W-30, 0W-40 |
| Above -18°C | 10W-30 |
| Above -7°C | 15W-40 |
| Above -29°C | 5W-40 |
Note: If biodiesel fuel blends (B20 max) are used, 5W-40 or 15W-40 oil is recommended.
How much oil does it take with a filter change?
Diesel maintenance notes for this vehicle
Proper maintenance of the 6.7L Power Stroke requires attention to both lubrication and filtration. When performing an oil change, ensure the drain plug is torqued to 19 ft/lbs. Because these engines are often used for heavy towing or in severe environments, selecting a high-quality synthetic diesel oil can help manage soot loading and maintain viscosity.
Common diesel oil-related concerns and how AMSOIL products may help
Diesel engines face unique stresses including high heat and soot accumulation. The following table outlines how specific AMSOIL products listed for this vehicle address these issues.
| Concern | Why it matters | AMSOIL product from this lookup | How it may help | Important limitation |
|---|---|---|---|---|
| Engine Wear | High pressure and friction in diesel cylinders | DTTQT-EA | Delivers up to 6X more wear protection in specific tests | Requires regular service intervals |
| Severe Service/Towing | Increased engine temperatures and load | DEOQT-EA | Maintains proper viscosity under high heat | Not a substitute for mechanical repair |
| Contaminant Buildup | Soot and wear particles can damage components | EAO98-EA | Provides 99% filtering efficiency at 20 microns | Must be replaced according to schedule |
Common maintenance concerns for this vehicle
Owners of the 2015 Ford F-250 HD should regularly inspect several key areas. Beyond standard oil and filter changes, monitoring the air filtration system is critical to prevent turbocharger issues caused by dust ingestion. Additionally, because diesel engines are often used in heavy-duty applications, checking for any signs of coolant leaks or degradation in antifreeze quality is a vital part of preventative maintenance.
Recall, TSB, and manufacturer communication notes
Official NHTSA research indicates the following recall information for the 2015 Ford F-250 HD Pickup. Owners should always verify their specific vehicle’s status using a VIN at an authorized dealer.
- Rearview Camera Issue: A recall (Campaign 25V270000) was issued regarding the rearview camera printed circuit board terminal header connector, which may be loose or damaged. This can result in a blank or distorted image. Dealers will replace the rearview camera free of charge.
- Emergency Vehicle Monitor Issue: A recall (Campaign 19V401000) was noted for certain vehicles equipped with ASA Electronics Voyager monitors, where displays may revert to factory settings, potentially reversing the camera image.
Note: Please contact Ford Customer Service or your local dealer to confirm if your specific VIN is affected by these or any other open recalls.
About this vehicle
The 2015 Ford F-250 HD Pickup equipped with the 6.7L 8-cylinder Diesel Turbo engine (Engine Code [T]) is a heavy-duty workhorse designed for significant towing and hauling capabilities. This model belongs to the Ford Power Stroke diesel family, which is widely recognized in the industry for its high torque output and durability in demanding environments.
Owners of this vehicle often use it for commercial applications, agricultural work, or heavy recreational towing. Because these engines operate under high combustion pressures and significant thermal loads, lubrication management is a primary focus for long-term engine health. The 6.7L Power Stroke is engineered to meet rigorous standards, but the demands of severe service—such as extended idling, heavy payloads, and varied climates—mean that selecting the correct oil viscosity (like 5W-40 for severe duty) and high-efficiency filtration is a common topic of research among owners.
Common questions about this vehicle’s diesel oil and maintenance
What is the oil capacity for my 2015 F-250 6.7L Diesel?
The capacity is 13.1 quarts when including a filter change. Always verify the level after refilling.
Can I use 10W-30 in my 6.7L Power Stroke?
Yes, the manufacturer recommends 10W-30 for normal usage. However, if you are using biodiesel blends (up to B20), a 5W-40 or 15W-40 is recommended.
What oil specification does Ford recommend?
The AMSOIL lookup note references the Ford Material Engineering Specification WSS-M2C171-F1 for this application.
How often should I change my diesel oil filter?
While specific intervals vary by usage, using high-efficiency filters like the EAO98-EA can help manage contaminants between service intervals.
What should I do if my rearview camera is blank?
This may be related to a known recall regarding the camera terminal connector. You should contact a Ford dealer to check for a free remedy under campaign 25V270000.
Is there a specific torque for the oil drain plug?
Yes, the recommended torque for the oil drain plug on this engine is 19 ft/lbs.
Disclaimer: This information is derived from provided source data. Always consult your vehicle’s owner’s manual and verify all maintenance procedures and specifications with a certified professional.