For the 2016 Audi A3 with the 2.0L 4-cylinder Engine Code DEJA K Diesel Turbo, the engine oil capacity is 5.8 quarts (with filter). The recommended viscosity is 5W-30. AMSOIL recommends using AMSOIL 5W-30 LS 100% Synthetic European Motor Oil (AELQT-EA) and a WIX Oil Filter (WL10056-EA) for optimal protection.
What oil does a 2016 Audi A3 2.0L Diesel Turbo take?
The 2016 Audi A3 2.0L diesel requires an oil viscosity of 5W-30 for all temperatures. The AMSOIL lookup specifies the SEO06 oil grade. It is critical to ensure that any synthetic oil used meets the applicable Audi and Volkswagen oil quality standards as noted in your vehicle’s requirements.
AMSOIL product recommendations
Based on the AMSOIL lookup for your 2016 Audi A3 Diesel, here are the recommended products to maintain your vehicle’s performance and longevity.
Engine Oil & Filter
| Product Name | Code |
|---|---|
| AMSOIL 5W-30 LS 100% Synthetic European Motor Oil | AELQT-EA |
| WIX Oil Filter | WL10056-EA |
Coolant & Brake Fluid
| Product Name | Code |
|---|---|
| AMSOIL Passenger Car & Light Truck Antifreeze & Coolant | ANTPC1G-EA |
| AMSOIL Propylene Glycol Antifreeze and Engine Coolant | ANT1G-EA |
| AMSOIL DOT 3 and DOT 4 100% Synthetic Brake Fluid | BFLVCN-EA |
Transmission & Fuel Additives
| Product Name | Code |
|---|---|
| AMSOIL 100% Synthetic DCT Fluid | DCTQT-EA |
| AMSOIL Diesel Injector Clean Fuel Additive | ADFPCN-EA |
| AMSOIL Diesel Cetane Boost Fuel Additive | ACBCN-EA |
| AMSOIL Diesel Injector Clean + Cetane Boost Fuel Additive | ADSCN-EA |
Engine Oil Specifications
| Viscosity | Oil Grade (AMSOIL lookup) |
|---|---|
| 5W-30 | SEO06 |
Note: If a synthetic oil meeting the applicable Audi/Volkswagen quality standard with the recommended viscosity is unavailable, use a grade suitable for your specific climate and operating conditions, ensuring it meets the listed standards.
Engine Oil Capacity
| Condition | Capacity |
|---|---|
| With Filter Change | 5.8 quarts |
Always check the oil level after refilling.
Oil Drain Torque Specs
| Component | Torque Value |
|---|---|
| Steel Pan Oil Drain Plug | 22 ft/lbs |
Maintenance Tip: Always replace the drain plug seal when performing an oil change.
Automatic Transmission Fluid Specifications
For vehicles equipped with the 0D9 automatic transmission, specific capacities apply depending on whether you are performing a partial or total fill. The AMSOIL lookup lists DCTQT-EA for this application.
Transmission Capacities
| Application | Capacity |
|---|---|
| Initial Fill | 3.2 quarts |
| Mechatronic Only | 3-4 liters (3.1-4.2 qt) |
| 6 Speed 0D9 Total Fill | 7.3 quarts |
| Total Transmission Capacity (incl. mechatronic) | 5.5 quarts |
Coolant and Brake Fluid Details
Coolant Specifications
The cooling system capacity is 8.5 quarts. AMSOIL offers two primary options for this vehicle:
- AMSOIL Passenger Car & Light Truck Antifreeze & Coolant (ANTPC1G-EA): A 50/50 pre-mix ethylene glycol formulation.
- AMSOIL Propylene Glycol Antifreeze and Engine Coolant (ANT1G-EA): A concentrated formula requiring mixing with distilled or high-quality water.
Brake Fluid Specifications
The vehicle requires Hydraulic Brake Fluid, DOT 4 (P/N B 000 750 M3). The AMSOIL lookup lists BFLVCN-EA for this application.
Common diesel oil-related concerns and how AMSOIL products may help
Diesel engines face unique stresses including soot accumulation and high compression. Proper lubrication is vital for maintaining turbocharger health and injector precision.
| Concern | Why it matters | AMSOIL Product | How it may help | Limitation |
|---|---|---|---|---|
| Dirty Injectors | Reduces fuel efficiency and power. | ADFPCN-EA | Cleans injectors and lubricates pumps. | Not a mechanical repair. |
| Low Cetane Levels | Affects combustion and startability. | ACBCN-EA | Increases cetane up to 8 points. | Does not fix mechanical issues. |
| Engine Storage | Risk of internal rust/corrosion. | FOGSC-EA | Protects internal components during inactivity. | For storage use only. |
Diesel maintenance notes for this vehicle
- Turbocharger Care: Maintaining high-quality oil is essential for the longevity of the turbocharging system inherent to modern diesel technology.
- Emissions Systems: Use oils that are compatible with European emissions standards to avoid harming sensitive components.
- Fuel Quality: Using high-quality fuel and additives can help prevent injector issues common in diesel engines.
Common maintenance concerns for this vehicle
Based on owner reports, several areas may require attention:
- Electrical/Driver Systems: Some owners have reported “Driver System Fault” messages or electrical issues that prevent starting.
- Fuel System Integrity: There are reports regarding fuel leaks and suction jet pump seals in similar Volkswagen Group diesel platforms.
- Airbag Systems: Note that certain models have had recalls related to occupant classification sensors and inflator modules.
Note: NHTSA complaints are owner reports and should not be treated as verified defects.
Recall, TSB, and manufacturer communication notes
NHTSA research indicates the following recall campaigns for the 2016 Audi A3:
- Occupant Classification: A recall (Campaign 21V198000) regarding the passenger occupant detection system (PODS) which may malfunction.
- Airbag Inflator: A recall (Campaign 22V543000) concerning the front passenger air bag module and potential improper deployment.
- Fuel System: A recall (Campaign 24V110000) regarding a suction jet pump seal inside the fuel tank that may cause leaks.
Important: Always verify your specific vehicle’s open recalls by contacting an authorized Audi dealer or using your VIN on the official NHTSA website.
About this vehicle
The 2016 Audi A3 is a premium C-segment small family car built upon the Volkswagen Group MQB platform. This specific model features a 2.0L 4-cylinder diesel engine equipped with a turbocharger, balancing compact dimensions with premium engineering.
Diesel engines within the Volkswagen Group ecosystem are known for their efficiency and torque delivery. Owners of this model often focus on maintaining complex emissions systems and turbocharging components. Because this vehicle shares a global platform with various other Volkswagen Group models, many mechanical components may share commonality across the group, though Audi-specific tuning is unique to the A3.
Typical use cases for the A3 diesel include efficient long-distance commuting and urban driving where fuel economy is a priority. Maintenance research typically centers on monitoring diesel-specific requirements and ensuring high-quality fuel is used to prevent injector issues. As with all modern diesel technology, maintaining the turbocharger system and emissions compliance is a key part of ownership.
Common questions about this vehicle’s diesel oil and maintenance
What is the oil capacity for my 2016 Audi A3 Diesel?
The capacity is 5.8 quarts when performing an oil change with a new filter. Always check the level after refilling.
What viscosity should I use for the DEJA K engine?
The recommended viscosity is 5W-30 (All TEMPS). The AMSOIL lookup lists this as the appropriate grade for your application.
How much transmission fluid does the 6-speed 0D9 take?
For a total fill of the 6-speed 0D9 transmission, the capacity is 7.3 quarts.
Can I use any antifreeze in my Audi A3?
The AMSOIL lookup lists both a pre-mixed OAT formulation and a concentrated propylene glycol option. Ensure you follow the manufacturer’s requirements for mixing if using concentrate.
How can I protect my diesel injectors?
Using fuel additives like ADFPCN-EA can help clean dirty injectors and lubricate pumps to reduce wear.
How do I check for active recalls on my Audi?
You should contact an authorized Audi dealer or visit the NHTSA website and enter your VIN to confirm any outstanding manufacturer communications or recalls.
Disclaimer: This information is derived from provided source data. Always consult your official Audi workshop manual or a certified technician to ensure compatibility with your specific vehicle configuration before performing maintenance.