For the 2023 Mercedes Benz Sprinter 4500 with the 2.0L 4-cylinder diesel engine (Engine Code 654.920 I), the oil capacity is 10.6 quarts with a filter change. Recommended viscosities include 0W-30, 0W-40, and 0W-20 for all temperatures, while 5W-30 and 5W-40 are suitable for temperatures above -25°C. AMSOIL recommends AMSOIL 0W-30 MS 100% Synthetic European Motor Oil (EOTQT-EA) for this application.
What oil does a 2023 Mercedes Benz Sprinter 4500 take?
The 2.0L 4-cylinder diesel engine (Code 654.920 I) requires specific oil viscosities to ensure proper lubrication and emissions system compatibility. The AMSOIL lookup lists several options depending on your operating temperature.
AMSOIL product recommendations
Based on the AMSOIL lookup data, here are the recommended products for your Mercedes Benz Sprinter 4500 diesel engine and cooling system.
| Component | Product Name | Product Code |
|---|---|---|
| Engine Oil | AMSOIL 0W-30 MS 100% Synthetic European Motor Oil | EOTQT-EA |
| Antifreeze/Coolant | AMSOIL Passenger Car & Light Truck Antifreeze & Coolant | ANTPC1G-EA |
| Antifreeze/Coolant | AMSOIL Propylene Glycol Antifreeze and Engine Coolant | ANT1G-EA |
Additional Diesel Maintenance Products
| Product Name | Product Code |
|---|---|
| AMSOIL Diesel Injector Clean | adfpcn-ea |
| AMSOIL Diesel Cetane Boost | acbcn-ea |
| AMSOIL Diesel Injector Clean + Cetane Boost | adscn-ea |
| AMSOIL Diesel Cold Flow Fuel Additive | addcn-ea |
| AMSOIL Diesel 4-IN-1 Fuel Additive | adbcn-ea |
Engine Oil Specifications
| Detail | Value |
|---|---|
| AMSOIL lookup oil grade | SEOD9 |
| Confirmed OEM Specification | Not confirmed from source data |
Engine Oil Viscosity Options
| Condition | Viscosity |
|---|---|
| All Temperatures | 0W-30, 0W-40, 0W-20 |
| Above -25°C | 5W-30, 5W-40 |
How much oil does it take with a filter change?
When performing an oil service on the 2023 Sprinter 4500, you must account for the volume required to fill the engine and the new filter. Always verify the level after refilling.
| Service Detail | Capacity/Torque |
|---|---|
| Oil Capacity (with filter) | 10.6 quarts |
| Oil Drain Plug Torque | 22 ft/lbs |
Note: Always replace the drain plug seal when performing an oil change.
Engine Oil and Filter Details
The engine requires high-quality synthetic lubricants to protect against the unique demands of European diesel engines. While AMSOIL provides specific recommendations, other components require careful attention.
Oil Filter Information
No recommendations available from source data for the oil filter.
Air and Vapor Filters
No recommendations available for the air filter or oil vapor filter from source data.
Coolant Specifications and Capacities
Maintaining the correct coolant level is vital for heavy-duty commercial applications. The capacity varies depending on your specific engine code configuration.
| Engine Code Configuration | Capacity |
|---|---|
| With O Code H12, H13, HZ9 | 10.6 quarts |
| With Code H12, H13, HZ9 | 13.1 quarts |
Diesel maintenance notes for this vehicle
For the 654 engine code, owners should prioritize diesel-specific maintenance including fuel system integrity and turbocharger health. Because this is a BlueTEC-associated engine, maintaining emissions system components is critical.
- Oil Level: Always check the oil level after refilling to ensure accuracy.
- Drain Plug: Ensure the drain plug seal is replaced during every service to prevent leaks.
- Emissions: Use lubricants designed not to harm emissions systems, such as EOTQT-EA.
Common diesel oil-related concerns and how AMSOIL products may help
Diesel engines face unique challenges such as soot loading, cold weather gelling, and injector deposits. The following table outlines how specific AMSOIL additives can support your maintenance routine.
| Concern | Why it matters | AMSOIL product from this lookup | How it may help | Important limitation |
|---|---|---|---|---|
| Dirty Injectors | Reduces power and increases emissions | adfpcn-ea | Cleans injectors and lubricates pumps | Diagnosis or repair may be required for mechanical failure |
| Low Cetane | Affects startability and idle smoothness | acbcn-ea | Increases cetane up to 8 points | Does not repair damaged components |
| Cold Weather Gelling | Can cause fuel filter plugging/icing | addcn-ea | Lowers cold filter-plugging point by up to 40°F | Does not replace proper fuel storage |
Common maintenance concerns for this vehicle
Owners of the Sprinter 4500 should consider the following practical checks:
- Fuel System Integrity: Given the high-pressure requirements of diesel injection, monitor fuel quality and filter condition.
- Turbocharger Health: Ensure lubrication is consistent to prevent turbocharger wear.
- Emissions (BlueTEC) Upkeep: Monitor Diesel Exhaust Fluid (DEF) levels and system health as part of standard operation.
Recall, TSB, and manufacturer communication notes
Official NHTSA recall research for the 2023 Mercedes Benz Sprinter 4500 returned no recall records at this time. Additionally, no consumer complaints were found in the NHTSA database for this specific model year/make/model combination. However, these results do not prove a vehicle has no issues; owners should always verify open recalls by VIN through an official Mercedes-Benz dealer or the NHTSA website.
About this vehicle
The 2023 Mercedes-Benz Sprinter 4500 is part of the broader Sprinter family of light commercial vehicles. This specific model is equipped with a 2.0L 4-cylinder diesel engine, identified by engine code 654.920 I. The Sprinter series is widely recognized for its versatility, serving as a platform for cargo transport, chassis cab configurations, and passenger transit.
Given the ‘4500’ designation, this vehicle is typically intended for heavy-duty commercial use. This high-duty cycle application requires rigorous maintenance schedules to ensure longevity under load. The 2.0L diesel configuration is part of a modern era of Mercedes-Benz diesel technology often associated with BlueTEC emissions standards. Because these vehicles are frequently used in demanding environments, owners should prioritize research into diesel-specific maintenance, including fuel system integrity and turbocharger health.
It is critical that owners consult the official Mercedes-Benz workshop manual for exact requirements regarding Diesel Exhaust Fluid (DEF) and other BlueTEC components to ensure compliance with emissions standards and engine longevity.
Common questions about this vehicle’s diesel oil and maintenance
What is the oil capacity for my 2023 Sprinter 4500?
The capacity is 10.6 quarts when including a filter change. You should always check the oil level after refilling.
What viscosity should I use for the 654 engine code?
The AMSOIL lookup lists 0W-30, 0W-40, and 0W-20 for all temperatures. For temperatures above -25°C, 5W-30 or 5W-40 are also options.
How much torque is needed for the oil drain plug?
The required torque for the oil drain plug is 22 ft/lbs. Remember to replace the drain plug seal during this process.
Can I use AMSOIL additives in my diesel Sprinter?
Yes, AMSOIL offers several options such as Diesel 4-IN-1 (adbcn-ea) which combines injector cleaning, cold flow, and cetane boost.
What should I do if I am storing my vehicle for a long time?
For seasonal storage or long periods of inactivity, AMSOIL recommends using Engine Fogging Oil (fogsc-ea) to protect internal engine components from rust.
How do I check for active recalls on my Sprinter?
While no recalls were found in recent NHTSA research, you should always verify open recalls by checking your specific VIN through official manufacturer channels.
Disclaimer: This information is derived from provided source data. Always consult your vehicle’s owner manual and professional mechanics for service requirements.