2024 GMC Sierra 2500 HD 6.6L L5P Diesel Oil & Filter Guide

AMSOIL diesel oil guide for 2024 GMC Sierra 2500 HD Pickup
AMSOIL diesel oil guide for trucks, vans, SUVs and diesel engines

Quick Summary: 2024 GMC Sierra 2500 HD 6.6L L5P Diesel Maintenance

For the 2024 GMC Sierra 2500 HD with the 6.6L 8-cylinder L5P Diesel Turbo engine, the oil capacity is 10 quarts (including filter change). The recommended viscosity for temperatures above -18°C (0°F) is 15W-40, though 5W-40 is suggested for improved cold starting when ambient temperatures are below 0°F. AMSOIL recommends using Signature Series 15W-40 100% Synthetic Max-Duty Diesel Oil paired with an AMSOIL Oil Filter (EAO17-EA) for optimal protection.

What oil does a 2024 GMC Sierra 2500 HD L5P take?

The 2024 GMC Sierra 2500 HD with the 6.6L L5P diesel engine requires an oil viscosity of 15W-40 for temperatures above -18°C (0°F). If you are operating in extreme cold where ambient temperatures drop below 0°F, it is recommended to use a 5W-40 viscosity to facilitate better cold starting. The AMSOIL lookup note specifies an oil specification of CJ-4.

AMSOIL Product Recommendations

The following AMSOIL products are specifically listed for the 2024 GMC Sierra 2500 HD with the 6.6L L5P Diesel engine to assist with routine maintenance and heavy-duty performance.

Engine Oil Options

Product Name Viscosity Part Code
AMSOIL Signature Series 15W-40 100% Synthetic Max-Duty Diesel Oil 15W-40 DMEQT-EA
AMSOIL 15W-40 Heavy-Duty 100% Synthetic Diesel Oil 15W-40 ADPQT-EA

Note: For ambient temperatures below 0°F (-18°C), use 5W-40 to improve cold starting.

Oil Filter Options

Product Name Part Code
AMSOIL Oil Filter EAO17-EA
WIX XP Oil Filter WL10255XP-EA
WIX Oil Filter WL10255-EA

Coolant & Antifreeze

Product Name Part Code
AMSOIL Passenger Car & Light Truck Antifreeze & Coolant ANTPC1G-EA
AMSOIL Propylene Glycol Antifreeze and Engine Coolant ANT1G-EA

Engine Oil Specifications & Capacity

Detail Specification/Value
Oil Viscosity (Standard) 15W-40
Oil Viscosity (Cold Start) 5W-40
Oil Specification CJ-4
Oil Capacity (with filter) 10 quarts

Drain Plug Torque

Component Torque Value
Oil Drain Plug 18 ft/lbs

Note: Always replace the drain plug seal when performing an oil change.

Diesel maintenance notes for this vehicle

  • Oil Level Verification: After refilling the engine with 10 quarts of oil, always check the oil level to ensure accuracy.
  • Cold Weather Operation: When ambient temperatures are below 0°F (-18°C), switching to a 5W-40 viscosity can help improve cold starting performance.
  • Filter Capacity: Using high-quality filters like the AMSOIL EAO17-EA provides 99 percent filtering efficiency at 20 microns, which helps reduce engine wear.

Common diesel oil-related concerns and how AMSOIL products may help

Diesel engines operating under heavy loads face unique lubrication challenges. Below is a breakdown of common concerns for the L5P platform.

Concern Why it matters AMSOIL Product How it may help Limitation
Extreme Pressure/Wear Heavy towing increases component stress. DMEQT-EA Delivers up to 6X more wear protection. Requires proper service intervals.
Cold Starting Thick oil can hinder startup in winter. 5W-40 Viscosity Improves flow during cold starts. Not a specific product code listed.
Contaminant Buildup Soot and wear particles can damage internals. EAO17-EA 99% efficiency at 20 microns. Must be replaced regularly.

Common maintenance concerns for this vehicle

Based on NHTSA consumer reports, owners of the 2024 GMC Sierra 2500 HD have noted several areas for attention:

  • Electrical Systems: A significant number of complaints involve electrical components.
  • Power Train: Some owners have reported concerns regarding power train performance.
  • Braking: Service brake-related inquiries have been noted in consumer data.

Note: NHTSA complaints are owner reports and should not be treated as verified defects.

Recall, TSB, and manufacturer communication notes

Official NHTSA research indicates the following recall campaigns for certain 2024 GMC Sierra 2500 models:

  • Steering Gear Shaft: A recall (Campaign 23V549000) was issued because the steering gear shaft may fracture, potentially leading to a loss of steering control.
  • Tailgate Latch: Recalls (Campaign 24V060000 and 24V894000) involve power-unlatching tailgates where the electronic release switch may short circuit due to water intrusion, causing the tailgate to unlatch while in park.

Important: Always verify your specific vehicle’s status by checking your VIN through official manufacturer channels or the NHTSA website.

About this vehicle

The 2024 GMC Sierra 2500 HD is a heavy-duty pickup truck engineered for high-capacity towing and demanding work environments. It is part of a lineage of General Motors heavy-duty trucks designed to meet both commercial and consumer demands for durability and torque.

This model features the 6.6L Duramax diesel engine (Engine Code L5P), which serves as a cornerstone for GM’s heavy-duty applications. Because these engines are engineered for high torque and longevity, maintenance is a critical component of ownership. Maintenance focus for this vehicle class generally centers on preserving the diesel exhaust aftertreatment system, maintaining fuel quality, and adhering to strict oil change intervals to protect turbocharger components and heavy-duty engine internals.

Owners often research technical specifications regarding the L5P variant to ensure they are using the correct fluids for high-stress tasks like hauling or heavy towing. As with all diesel workhorses, maintaining fluid integrity is essential for long-term reliability.

Common questions about this vehicle’s diesel oil and maintenance

How much oil does my 6.6L L5P Duramax take?

The engine requires 10 quarts of oil when performing a service that includes the oil filter change.

What is the recommended oil viscosity for winter?

While 15W-40 is standard for temperatures above -18°C (0°F), using 5W-40 is recommended to improve cold starting when ambient temperatures are below 0°F.

What is the oil drain plug torque for this engine?

The oil drain plug should be torqued to 18 ft/lbs. It is also advised to replace the drain plug seal during this process.

Can I use AMSOIL for my heavy-duty towing needs?

Yes, AMSOIL Signature Series 15W-40 (DMEQT-EA) is designed to provide outstanding extreme-pressure protection and wear protection for heavy-duty applications.

What should I check regarding my tailgate?

Due to manufacturer recalls regarding power-unlatching tailgates, owners should ensure the tailgate is securely closed and latched before driving.

How do I verify if my truck has an open recall?

You should contact a GMC dealer or visit the official NHTSA website and provide your Vehicle Identification Number (VIN) to check for active recalls or manufacturer communications.

Disclaimer: The information provided is based on available source data. Always consult your vehicle’s owner’s manual or a certified professional before performing maintenance.

Scroll to Top