What oil does a 2024 Mercedes Benz Sprinter 3500XD take?
The 2024 Mercedes Benz Sprinter 3500XD with the 2.0L 4-cylinder (Engine Code 654.920 0) requires specific oil viscosities to ensure engine longevity and emissions compliance. For all temperatures, recommended viscosities include 0W-30, 0W-40, or 0W-20. When operating in temperatures above -25°C, 5W-30 or 5W-40 may also be used. The oil capacity is 10.6 quarts with a filter change.
AMSOIL Product Recommendations
Based on the AMSOIL lookup for the 2024 Mercedes Benz Sprinter 3500XD, the following products are recommended for your maintenance needs:
Engine Oil
| Product Name | Viscosity | Product Code |
|---|---|---|
| AMSOIL 0W-30 MS 100% Synthetic European Motor Oil | 0W-30 | EOTQT-EA |
Coolant & Antifreeze
| Product Name | Product Code |
|---|---|
| AMSOIL Passenger Car & Light Truck Antifreeze & Coolant | ANTPC1G-EA |
| AMSOIL Propylene Glycol Antifreeze and Engine Coolant | ANT1G-EA |
Differential & Gear Lubricants
| Product Name | Product Code |
|---|---|
| AMSOIL SEVERE GEAR® 75W-90 100% Synthetic Gear Lube | SVGPK-EA |
Brake Fluid
| Product Name | Product Code |
|---|---|
| AMSOIL DOT 3 and DOT 4 100% Synthetic Brake Fluid | BFLVCN-EA |
Diesel Fuel Additives
| Product Name | Product Code |
|---|---|
| AMSOIL Diesel Injector Clean Fuel Additive | ADFPCN-EA |
| AMSOIL Diesel Cetane Boost Fuel Additive | ACBCN-EA |
| AMSOIL Diesel Injector Clean + Cetane Boost Fuel Additive | ADSCN-EA |
| AMSOIL Diesel Cold Flow Fuel Additive | ADDCN-EA |
Engine Oil Specifications and Details
For the 2.0L 4-cylinder Engine Code 654.920 0, maintaining correct oil viscosity is essential for both engine protection and emissions system health.
Oil Viscosity Options
| Temperature Range | Viscosity |
|---|---|
| All Temperatures | 0W-30, 0W-40, 0W-20 |
| Above -25°C | 5W-30, 5W-40 |
Oil Capacity and Service Data
| Metric | Value |
|---|---|
| Capacity (with filter) | 10.6 quarts |
| Oil Drain Plug Torque | 22 ft/lbs |
| Drain Plug Note | Replace drain plug seal |
Note: After refilling, always check the oil level.
Filters and Other Components
| Component | Recommendation |
|---|---|
| Oil Filter | No recommendations available from source data |
| Air Filter | No recommendations available from source data |
| Oil Vapor Filter | No recommendations available from source data |
Coolant and Brake Fluid Specifications
Proper cooling system maintenance is vital for heavy-duty diesel applications to prevent overheating and component corrosion.
Coolant Capacity
| Configuration | Capacity |
|---|---|
| With O Code H12, H13, HZ9 | 10.6 quarts |
| With Code H12, H13, HZ9 | 13.1 quarts |
Brake Fluid Requirements
For the HBH recommendation, the AMSOIL lookup note specifies:
- Use DOT 4 plus, 0009895605090109 (previously 0009895605110111, 000989080701)
- Or products approved on MB Sheet 331.0
For this application, the AMSOIL lookup lists BFLVCN-EA.
Differential Maintenance
The front differential requires specific lubrication to handle the torque demands of the Sprinter 3500xd platform.
| Service Type | Capacity |
|---|---|
| Front Service Refill | 1.5 pints |
| Front Total/Dry Fill | 1.8 pints |
The AMSOIL lookup lists SVGPK-EA for this application.
Diesel maintenance notes for this vehicle
- Emissions Systems: This vehicle utilizes Mercedes BlueTEC technology. Maintaining the health of the Selective Catalytic Reduction (SCR) system by using high-quality Diesel Exhaust Fluid (DEF/AdBlue) is critical for long-term reliability.
- Oil Management: Because these vehicles often operate under high-stress duty cycles, maintenance should focus on oil change intervals optimized for soot management.
- Fuel System: Monitoring fuel filter replacement and ensuring clean fuel delivery is essential for the OM654 engine’s performance.
Common diesel oil-related concerns and how AMSOIL products may help
| Concern | Why it matters | AMSOIL product from this lookup | How it may help | Important limitation |
|---|---|---|---|---|
| Diesel Injector Deposits | Dirty injectors reduce power and efficiency. | ADFPCN-EA | Cleans dirty injectors and lubricates pumps/injectors. | Not a mechanical repair tool. |
| Low Cetane Levels | Affects combustion, startability, and idle smoothness. | ACBCN-EA | Increases cetane up to 8 points and improves startability. | Not a mechanical repair tool. |
| Cold Weather Gelling | Can cause fuel filter plugging in low temperatures. | ADDCN-EA | Lowers cold filter-plugging point (CFPP) by up to 40°F. | Not a mechanical repair tool. |
| Differential Wear | High torque can cause wear in gear components. | SVGPK-EA | Provides advanced protection against wear and controls thermal runaway. | Not a mechanical repair tool. |
Common maintenance concerns for this vehicle
Owners of the Sprinter 3500xd should consider the following practical checks:
- Cooling System Integrity: Given the heavy-duty nature of these vehicles, regular inspections of hoses and gaskets are recommended.
- Exhaust Aftertreatment: Monitoring the health of the BlueTEC/SCR components to ensure proper NOx reduction.
- Fuel Quality: Ensuring fuel is free from contaminants that could affect high-pressure injection systems.
Recall, TSB, and manufacturer communication notes
Official NHTSA recall research for the 2024 Mercedes Benz Sprinter 3500xd returned no recall records at the time of this writing. Additionally, no consumer complaints were found in the NHTSA database for this specific year/make/model combination. However, owners should always verify open recalls by VIN through an authorized dealer, as applicability can depend on production date and specific equipment.
About this vehicle
The 2024 Mercedes-Benz Sprinter 3500xd is equipped with the 2.0L 4-cylinder OM654 engine, representing a modern iteration of Mercedes-Benz’s diesel commercial vehicle lineup. The OM654 engine family is characterized by its use of twin-scroll turbocharging technology, which is designed to optimize power delivery within a smaller displacement footprint compared to older, larger displacement diesel engines.
As part of the Mercedes BlueTEC technology suite, this vehicle utilizes advanced emissions control systems designed to meet stringent nitrogen oxide (NOx) standards. This typically incorporates Selective Catalytic Reduction (SCR), which requires the use of Diesel Exhaust Fluid (DEF/AdBlue). Depending on specific configurations, these systems may also include diesel particulate filters (DPF) and NOx adsorbers.
The Sprinter 3500xd is commonly utilized in heavy-duty commercial applications where payload capacity and torque efficiency are paramount. Because these vehicles often operate under high-stress duty cycles, maintenance schedules generally focus on diesel-specific requirements such as fuel filter replacement, oil change intervals optimized for soot management, and cooling system integrity. Owners should always consult the official Mercedes-Benz service manual or VIN-specific technical documentation to confirm exact service intervals and specifications.
Common questions about this vehicle’s diesel oil and maintenance
How much oil does my Sprinter 3500xd take?
The 2.0L 4-cylinder engine requires approximately 10.6 quarts of oil when performing a service that includes a filter change.
What is the correct oil viscosity for the OM654 engine?
The AMSOIL lookup lists 0W-30, 0W-40, or 0W-20 for all temperatures. For temperatures above -25°C, 5W-30 or 5W-40 are also options.
Does my Sprinter need special fuel additives?
While not required by the manufacturer, AMSOIL offers products like ADFPCN-EA for injector cleaning and ACBCN-EA to increase cetane levels.
What should I use for the front differential?
The AMSOIL lookup lists SVGPK-EA for this application, with a service refill capacity of 1.5 pints.
How do I maintain the BlueTEC system?
Maintaining the BlueTEC system involves ensuring high-quality DEF usage and monitoring exhaust aftertreatment components like the SCR.
How can I check for recalls on my Sprinter?
Owners should verify open recalls by checking their specific VIN through an authorized Mercedes-Benz dealer or the official NHTSA website.
Disclaimer: Not all information is confirmed from source data. Always consult your vehicle’s owner manual and official service documentation before performing maintenance.