What oil does a 2014 BMW 328d take?
The 2014 BMW 328d with the 2.0L 4-cylinder N47D20 C Diesel Turbo engine requires a 0W-30 viscosity motor oil. For a standard oil change, the engine oil capacity is 5.5 quarts (including the filter). AMSOIL recommends using AMSOIL 5W-30 LS 100% Synthetic European Motor Oil or AMSOIL 5W-40 MS 100% Synthetic European Motor Oil.
AMSOIL product recommendations
Based on the AMSOIL lookup for the 2014 BMW 328d, the following products are recommended for your maintenance needs:
Engine Oil
| Product Name | Viscosity | Product Code |
|---|---|---|
| AMSOIL 5W-30 LS 100% Synthetic European Motor Oil | 0W-30 | AELQT-EA |
| AMSOIL 5W-40 MS 100% Synthetic European Motor Oil | 5W-40 | AFLQT-EA |
Note: The AMSOIL lookup note mentions that while BMW may now recommend 0W-30 meeting LL-12FE, these products are recommended for the LL-04 specification and viscosity found in your owner’s manual.
Transmission & Brake Fluids
| Component | Product Name | Product Code |
|---|---|---|
| Automatic Transmission | Signature Series Fuel-Efficient ATF | ATLPK-EA |
| Automatic Transmission | OE Fuel-Efficient ATF | OTLQT-EA |
| Brake Fluid | DOT 3 and DOT 4 Synthetic Brake Fluid | BFLVCN-EA |
Coolant & Additives
| Component | Product Name | Product Code |
|---|---|---|
| Antifreeze/Coolant | Passenger Car & Light Truck Antifreeze | ANTPC1G-EA |
| Antifreeze/Coolant | Propylene Glycol Antifreeze | ANT1G-EA |
| Diesel Additive | Diesel Injector Clean | ADFPCN-EA |
| Diesel Additive | Diesel Cetane Boost | ACBCN-EA |
Engine Oil Specifications and Details
Proper lubrication is critical for the N47D20 C diesel engine to maintain turbocharger health and emissions compliance.
Oil Capacity and Torque
| Specification | Value |
|---|---|
| Oil Viscosity | 0W-30 (All Temps) |
| Capacity (with filter) | 5.5 quarts |
| Oil Drain Plug Torque | 18 ft/lbs |
Note: Always replace the drain plug seal when performing an oil change. After refilling, check the oil level.
Filters and Other Components
| Component | Recommendation |
|---|---|
| Oil Filter | No recommendations available from source data |
| Air Filter | No recommendations available from source data |
| Coolant Capacity | 8.1 quarts |
Diesel maintenance notes for this vehicle
Because the 2014 BMW 328d utilizes a turbo-diesel setup, maintenance should focus on fuel system integrity and emissions component health. Owners should prioritize high-quality diesel fuel to help prevent injector issues and monitor Diesel Particulate Filter (DPF) performance. Regular changes of engine oil and filters are essential to protect the turbocharger and high-pressure injection system.
Common maintenance concerns for this vehicle
Based on NHTSA data, owners of the 2014 BMW 328d should be aware of several potential areas of concern:
- EGR System: There is a known recall regarding the Exhaust Gas Recirculation (EGR) module with an integrated cooler. Internal leaks can cause coolant to mix with diesel soot, potentially leading to intake manifold damage or fire risks.
- Fuel System Integrity: NHTSA complaints include reports of High-Pressure Fuel Pump (HPFP) failures. Some reports describe catastrophic failure resulting in metal shavings contaminating the entire fuel system.
- Driveline: A recall exists for constant-velocity joints that may damage, potentially causing a loss of power to the rear wheels.
Common diesel oil-related concerns and how AMSOIL products may help
| Concern | Why it matters | AMSOIL product from this lookup | How it may help | Important limitation |
|---|---|---|---|---|
| Diesel Injector Deposits | Dirty injectors can reduce power and increase emissions. | ADFPCN-EA | Cleans dirty injectors and lubricates pumps to reduce wear. | Does not repair mechanically broken hardware. |
| Poor Combustion/Startability | Low cetane levels can affect engine performance and idle. | ACBCN-EA | Increases cetane up to 8 points and improves startability. | Effectiveness depends on initial fuel quality. |
| Engine Wear/Soot | Diesel engines produce soot that can degrade oil quality. | AELQT-EA | Provides exceptional engine protection for European diesel engines. | Requires adherence to service intervals. |
Recall, TSB, and manufacturer communication notes
NHTSA research indicates several active recalls for the 2014 BMW 328d:
Disclaimer: Owners should verify current open recalls by contacting a BMW authorized dealer or checking their specific VIN at the NHTSA website.
About this vehicle
The 2014 BMW 328d is a diesel-powered variant of the sixth-generation BMW 3 Series, commonly associated with chassis codes F30 (sedan), F31 (wagon/Touring), and F34 (Gran Turismo). This generation marked a significant shift for the 3 Series, being among the first in its lineage to utilize exclusively turbocharged engines and electric power steering.
The vehicle is powered by the N47d20 engine, a 2.0L 4-cylinder turbo-diesel. This engine family serves as a critical bridge in BMW’s diesel evolution between older straight-six models and newer iterations. Because this model utilizes a turbocharger and high-pressure injection, maintenance focuses heavily on fuel system integrity and emissions component health. Owners often research the performance of the Diesel Particulate Filter (DPF) and the longevity of the high-pressure fuel pump.
As this generation transitioned from hydraulic to electric power steering, mechanical inspection points differ from older BMW models. While enthusiasts often focus on high-performance M3 variants, the 328d is specifically engineered for efficiency and torque-heavy driving dynamics, making it a popular choice for long-distance commuters.
Common questions about this vehicle’s diesel oil and maintenance
What is the oil capacity for my 2014 BMW 328d?
The engine requires 5.5 quarts of oil when performing a change that includes the filter.
Can I use a different viscosity than 0W-30?
The AMSOIL lookup lists 0W-30 as the recommended viscosity for all temperatures, though it also provides options like 5W-40 MS (AFLQT-EA) for those following specific European formulas.
How often should I use diesel fuel additives?
Using products like ADFPCN-EA can help maintain injectors and lubricate pumps, but specific intervals should be based on your driving conditions and fuel quality.
Does my BMW 328d require special brake fluid?
The AMSOIL lookup note references BMW P/N 81 22 0 142 156 or 81 22 0 142 155. If unavailable, a low viscosity DOT 4 brake fluid like BFLVCN-EA is recommended.
What should I do if my EGR cooler is recalled?
If your vehicle is part of the EGR recall, BMW will inspect and replace the cooler or intake manifold as necessary free of charge. Contact BMW customer service at 1-800-525-7417.
Is there a specific transmission fluid for my automatic?
For the GA8HP45Z transmission, AMSOIL lists ATLPK-EA and OTLQT-EA as options.
Verification Disclaimer: All technical specifications, capacities, and torque values are sourced from the provided AMSOIL and NHTSA data. Always verify with your vehicle’s owner manual or a certified professional before performing maintenance.