For the 2007 Jeep Grand Cherokee with the 3.0L 6-cylinder Engine Code [M] Diesel Turbo, the engine oil capacity is 10 quarts (with filter) using a 5W-30 viscosity. AMSOIL recommends AMSOIL 5W-30 100% Synthetic Diesel Oil (DP530QT-EA) paired with a MANN-FILTERS HU821X-EA oil filter for optimal protection.
What oil does the 2007 Jeep Grand Cherokee 3.0L Diesel take?
The 2007 Jeep Grand Cherokee 3.0L 6-cylinder diesel engine requires an oil viscosity of 5W-30 for all temperature ranges. The AMSOIL lookup identifies the SEO10 oil grade for this application. It is critical to use a high-quality synthetic diesel oil designed to handle the specific combustion characteristics of a turbo-diesel engine.
AMSOIL product recommendations
Based on the specific requirements for the 3.0L Diesel Turbo engine, AMSOIL provides high-performance synthetic options to maintain engine health and efficiency.
Engine Oil & Filter
| Product Name | Part Code |
|---|---|
| AMSOIL 5W-30 100% Synthetic Diesel Oil | DP530QT-EA |
| Filter Type | Part Code |
|---|---|
| MANN-FILTERS Oil Filter | HU821X-EA |
Air & Coolant
| Component | Product/Code |
|---|---|
| Air Filter | WIX 42329-EA |
| Antifreeze (Pre-mix) | ANTPC1G-EA |
| Antifreeze (Concentrate) | ANT1G-EA |
Automatic Transmission Fluid
Engine Oil Specifications
| Specification | Value |
|---|---|
| Oil Viscosity | 5W-30 (All TEMPS) |
| AMSOIL Lookup Oil Grade | SEO10 |
Engine Oil Capacity & Torque
| Measurement | Capacity/Torque |
|---|---|
| Oil Capacity (with filter) | 10 quarts |
| Oil Drain Plug Torque | 22 ft/lbs |
Important Maintenance Note: Any time the oil is drained and filled, it is critical to wait 15 minutes before starting the engine. Before checking the engine oil level, turn the engine off and wait 15 minutes for the oil to return to the oil pan.
Automatic Transmission Fluid Requirements
The transmission fluid requirements vary depending on your specific drivetrain configuration (RWD vs 4WD) and transmission model. For all listed applications, the AMSOIL lookup references Mopar ATF+4 P/N 05013457AA.
545RFE RWD Configuration
| Fill Type | Capacity |
|---|---|
| Initial Fill | 5.5 quarts |
| Total Fill | 14.1 quarts |
545RFE 4WD Configuration
| Fill Type | Capacity |
|---|---|
| Initial Fill | 6.6 quarts |
| Total Fill | 14.1 quarts |
W5J400 & W5A580 Configurations
| Transmission | Initial/Total Capacity |
|---|---|
| W5J400 | 5.3 qts / 8.1 qts Total |
| W5A580 | 5.3 qts / 8.1 qts Total |
Note for W5J400/W5A580: The fluid level is preset at the factory and does not require adjustment under normal conditions. If a leak occurs, check with a dealer to have the fluid level inspected.
Diesel maintenance notes for this vehicle
Maintaining a turbo-diesel engine requires specific attention to several key areas to ensure longevity:
- Turbocharger Health: Proper lubrication is vital. Monitoring boost levels and ensuring consistent oil quality helps protect the turbocharger components.
- Fuel System Integrity: High-quality diesel filtration is necessary to protect fuel injectors from contaminants.
- Cooling System Management: Diesel engines generate significant heat loads; regular inspection of the cooling system is vital for managing these temperatures.
- Oil Service: Always allow oil to drain back into the pan for 15 minutes before checking levels or starting the engine after an oil change.
Common diesel oil-related concerns and how AMSOIL products may help
| Concern | Why it matters | AMSOIL Product | How it may help | Limitation |
|---|---|---|---|---|
| Turbocharger Wear | High-speed rotation requires constant lubrication. | DP530QT-EA | Provides outstanding protection and viscosity retention. | Requires regular service intervals. |
| Engine Wear | Diesel combustion creates high pressure/heat. | DP530QT-EA | Delivers up to 6X more wear protection than leading standards. | Not a repair for existing damage. |
| Temperature Extremes | Cold starts or high heat can stress oil. | DP530QT-EA | Excels in hot and cold temperature extremes. | N/A |
Common maintenance concerns for this vehicle
Based on owner reports and general diesel operation, owners should consider the following:
- Electrical System: Some users have reported issues regarding ignition switches or electrical components.
- Cooling System: Given the heat loads of turbo-diesel engines, monitoring for leaks in hoses and gaskets is recommended.
- Braking/Safety: Ensure all braking systems are inspected regularly as part of standard maintenance.
Recall, TSB, and manufacturer communication notes
NHTSA research indicates several important communications for the 2007 Jeep Grand Cherokee:
- Ignition Switch Recall (Campaign 14V438000): Certain models may have a defect where the driver could accidentally knock the key out of the run position, potentially de-powering safety systems like airbags and power steering. Chrysler has offered free replacement for this switch.
- Exterior Lighting: There was a recall regarding non-compliant aftermarket combination corner and bumper lamp assemblies that lacked required amber side reflectors.
Note: Always verify open recalls by checking your specific VIN through the NHTSA website or contacting a Chrysler dealer.
About this vehicle
The 2007 Jeep Grand Cherokee is part of the third generation (WK platform) of the Grand Cherokee lineup, which was produced between 2005 and 2010. This generation introduced an independent front suspension to improve on-road handling and ride quality compared to previous generations like the ZJ or WJ.
While many North American models utilized gasoline engines such as the 3.7L V6 or 4.7L V8, the 3.0L Diesel Turbo engine is a specific configuration often associated with international markets or regional requirements. This diesel variant is highly regarded for its heavy-duty towing capabilities and long-distance fuel efficiency.
Owners of this diesel model should prioritize specialized maintenance, specifically focusing on high-quality diesel filtration to protect injectors and monitoring turbocharger health through proper lubrication practices. Because the technical nuances of a 3.0L diesel engine differ significantly from gasoline counterparts, verifying all fluid specifications against the owner’s manual is highly recommended.
Common questions about this vehicle’s diesel oil and maintenance
How much oil does my 2007 Jeep Grand Cherokee 3.0L Diesel take?
It takes 10 quarts of oil when performing a service that includes a filter change.
What is the correct oil viscosity for this engine?
The recommended viscosity is 5W-30 for all temperature ranges.
Can I use standard gasoline motor oil in my diesel Jeep?
No, it is recommended to use a diesel-specific oil like AMSOIL 5W-30 Synthetic Diesel Oil to meet the requirements of a compression-ignition engine.
What should I do after an oil change?
It is critical to wait 15 minutes after filling the oil before starting the engine to allow the oil to settle in the pan.
Does my transmission require special fluid?
Yes, the AMSOIL lookup notes that for your automatic transmission (such as the 545RFE), the application references Mopar ATF+4 P/N 05013457AA.
How often should I change my coolant?
AMSOIL offers protection up to 150,000 miles or 5 years for their Passenger Car & Light Truck Antifreeze, but you should consult your owner’s manual for the specific interval.
Disclaimer: This information is derived from provided source data. Always verify maintenance specifications, capacities, and torque values in your official vehicle owner’s manual or with a certified mechanic before performing service.