For the 2016 Mercedes Benz GLE300D equipped with the 2.1L 4-cylinder Engine Code 651.9 D Diesel Turbo, the engine oil capacity is 6.9 quarts (including filter replacement). Recommended viscosities include 0W-30 or 0W-40 for all temperatures, with other options like 5W-30 or 15W-40 available depending on ambient conditions. AMSOIL recommends AMSOIL 0W-30 MS 100% Synthetic European Motor Oil (EOTQT-EA) for this application.
What oil does a 2016 Mercedes Benz GLE300D take?
The 2016 Mercedes Benz GLE300D with the 2.1L 4-cylinder engine (Code 651.9 D) requires specific oil viscosities to ensure proper lubrication across various temperature ranges. The AMSOIL lookup lists several options depending on your climate.
AMSOIL product recommendations
Based on the AMSOIL lookup data, here are the recommended products for your Mercedes Benz GLE300D diesel engine and drivetrain components.
Engine Oil
| Product Name | Part Code |
|---|---|
| AMSOIL 0W-30 MS 100% Synthetic European Motor Oil | EOTQT-EA |
Coolant & Antifreeze
| Product Name | Part Code |
|---|---|
| AMSOIL Passenger Car & Light Truck Antifreeze & Coolant | ANTPC1G-EA |
| AMSOIL Propylene Glycol Antifreeze and Engine Coolant | ANT1G-EA |
Automatic Transmission Fluid
| Product Name | Part Code |
|---|---|
| AMSOIL Signature Series Fuel-Efficient 100% Synthetic ATF | ATLPK-EA |
| AMSOIL OE Fuel-Efficient 100% Synthetic ATF | OTLQT-EA |
Transfer Case & Differential
| Component | Product Name | Part Code |
|---|---|---|
| Transfer Case | AMSOIL Signature Series Fuel-Efficient ATF | ATLPK-EA |
| Front Differential | AMSOIL SEVERE GEAR® 75W-90 Synthetic Gear Lube | SVGPK-EA |
Engine Oil Viscosity Options
| Temperature Condition | Recommended Viscosity |
|---|---|
| All Temperatures | 0W-30, 0W-40 |
| Above -25°C | 5W-30, 5W-40 |
| Above -20°C | 10W-30, 10W-40 |
| Above -15°C | 15W-40 |
AMSOIL lookup oil grade: SEOE0
Engine Oil Capacity and Torque Specs
| Specification | Value |
|---|---|
| Oil Capacity (with filter) | 6.9 quarts |
| Metal Drain Plug Torque | 22 ft/lbs |
| Plastic Drain Plug Torque | 3 ft/lbs |
Note: After refilling, always check the oil level manually.
Engine Oil and Filter Details
Maintaining the correct lubrication is vital for the OM651 engine family. While AMSOIL provides high-performance synthetic options, specific filter part numbers were not confirmed from source data.
- Oil Filter: No recommendations available from source data.
- Air Filter: No recommendations available from source data.
- Oil Vapor Filter: No recommendations available from source data.
Transmission and Drivetrain Fluid Specifications
The transmission requirements for the GLE300D vary based on the datacard code found in your vehicle.
Automatic Transmission (722.908)
The total fill capacity is 9.5 quarts. Requirements depend on the A89 code:
- With A89 Code (Reduced-Friction): Fluid is Blue in color.
- Without A89 Code: Fluid is Red in color.
Transfer Case Lubricant
Capacity varies based on the presence of Code 430:
- With Code 430: 3.2 pints
- Without Code 430: 1.1 pints
Front Differential
The front differential requires 1.7 pints of lubricant.
Diesel maintenance notes for this vehicle
Owners of BlueTEC diesel vehicles should prioritize the maintenance of emissions control components. This includes monitoring Diesel Exhaust Fluid (DEF) levels and ensuring the health of the Diesel Particulate Filter (DPF) and Selective Catalytic Reduction (SCR) system. Regular inspections of the exhaust aftertreatment system are vital for performance and legal compliance.
Common diesel oil-related concerns and how AMSOIL products may help
| Concern | Why it matters | AMSOIL product from this lookup | How it may help | Important limitation |
|---|---|---|---|---|
| Emissions System Health | Diesel engines use complex SCR/DPF systems. | EOTQT-EA | Designed to provide protection without harming emissions systems. | Does not replace mechanical repair of DPF/SCR. |
| Heavy Towing/Terrain | Increases heat and stress on transmission. | ATLPK-EA | Withstands rigors of heavy towing and elevated temperatures. | Requires proper fluid level maintenance. |
| Cold Weather Starts | Thick oil can cause wear during startup. | EOTQT-EA | Provides flow in low temperatures (0W viscosity). | Must match specific vehicle requirements. |
Common maintenance concerns for this vehicle
Based on the engine profile, owners should consider the following:
- Emissions Compliance: Mercedes-Benz diesel engines from this era have been subject to regulatory scrutiny. It is recommended to verify if any manufacturer-issued software updates or retrofits are required for your specific VIN.
- Aftertreatment Maintenance: Monitoring the health of the DPF and SCR system is critical for BlueTEC technology.
- Fluid Integrity: Ensure transmission fluid color (Blue vs Red) matches your vehicle’s A89 code to prevent shifting issues.
Recall, TSB, and manufacturer communication notes
Official NHTSA recall research for the 2016 Mercedes Benz Gle300d returned no recall records at the time of this writing. However, owners should always verify open recalls by VIN, as applicability depends on production date, trim, and specific equipment. Official TSB research was not included in this draft; please consult a dealer for the latest manufacturer communications.
About this vehicle
The 2016 Mercedes-Benz GLE300d is powered by the OM651 engine, a 2.1L 4-cylinder diesel powerplant. This vehicle utilizes Mercedes-Benz’s BlueTEC technology, which is an advanced emissions control suite designed to reduce nitrogen oxide (NOx) output. BlueTEC systems typically incorporate Selective Catalytic Reduction (SCR) using diesel exhaust fluid (DEF), as well as particulate filters and NOx adsorbers (DeNOx) to meet stringent environmental standards.
The OM651 engine is part of a significant lineage of Mercedes-Benz diesel engines that have undergone technological evolution. While other configurations like the 3.0L V6 OM642 exist in the broader Mercedes lineup, this specific GLE model belongs to the 4-cylinder OM651 family. Because these systems are critical to both performance and legal compliance, regular inspections of the exhaust aftertreatment system are vital for long-term reliability.
Common questions about this vehicle’s diesel oil and maintenance
How much oil does my GLE300D take?
The 2.1L engine requires 6.9 quarts of oil when performing a service that includes the filter replacement.
What is the correct oil viscosity for cold weather?
For temperatures below -25°C, AMSOIL lists 5W-30 or 5W-40. For all other temperatures, 0W-30 or 0W-40 is recommended.
Does my transmission fluid color matter?
Yes. If your vehicle has the A89 code (Reduced-Friction) on the datacard, the fluid should be Blue. Without that code, the fluid is Red.
How often should I service the BlueTEC system?
While specific intervals vary, owners should prioritize monitoring DEF levels and the health of the DPF/SCR components to ensure emissions compliance.
Can I use any antifreeze in my Mercedes?
The AMSOIL lookup lists ANTPC1G-EA as a compatible option, which is an OAT formulation designed to protect cooling system metals and gaskets.
How do I check for recalls on my GLE300D?
You should always verify open recalls by using your specific Vehicle Identification Number (VIN) through official Mercedes-Benz channels or the NHTSA website.
Disclaimer: This information is derived from provided source data. Always consult your vehicle’s owner manual or a certified professional before performing maintenance.