The 2016 BMW 328d with the 2.0L 4-cylinder N47D20 B diesel engine requires an oil capacity of 5.5 quarts (including filter replacement). The recommended viscosity is 0W-30 for all temperatures. AMSOIL recommends using AMSOIL 5W-30 LS 100% Synthetic European Motor Oil or AMSOIL 5W-40 MS 100% Synthetic European Motor Oil to provide exceptional engine protection without harming emissions systems.
AMSOIL Product Recommendations
Based on the AMSOIL lookup for the 2016 BMW 328d, the following products are recommended for your maintenance needs:
Engine Oil Options
| Product Name | Code |
|---|---|
| AMSOIL 5W-30 LS 100% Synthetic European Motor Oil | AELQT-EA |
| AMSOIL 5W-40 MS 100% Synthetic European Motor Oil | AFLQT-EA |
Coolant & Brake Fluid
| Product Name | Code |
|---|---|
| AMSOIL Passenger Car & Light Truck Antifreeze & Coolant | ANTPC1G-EA |
| AMSOIL Propylene Glycol Antifreeze and Engine Coolant | ANT1G-EA |
| AMSOIL DOT 3 and DOT 4 100% Synthetic Brake Fluid | BFLVCN-EA |
Automatic Transmission Fluid
| Product Name | Code |
|---|---|
| AMSOIL Signature Series Fuel-Efficient 100% Synthetic ATF | ATLPK-EA |
| AMSOIL OE Fuel-Efficient 100% Synthetic ATF | OTLQT-EA |
Diesel Fuel Additives
| Product Name | Code |
|---|---|
| AMSOIL Diesel Injector Clean | ADFPCN-EA |
| AMSOIL Diesel Cetane Boost | ACBCN-EA |
| AMSOIL Diesel Injector Clean + Cetane Boost | ADSCN-EA |
| AMSOIL Diesel Cold Flow Fuel Additive | ADDCN-EA |
| AMSOIL Diesel 4-IN-1 Fuel Additive | ADBCN-EA |
Quick Answer: What oil does a 2016 BMW 328d take?
Engine Oil Specifications & Details
Proper lubrication is critical for the N47D20 B diesel engine. The AMSOIL lookup note provides specific guidance regarding viscosity and oil grades.
Oil Viscosity and Capacity
| Parameter | Specification |
|---|---|
| AMSOIL Lookup Oil Grade | SEO70 |
| Viscosity (All Temps) | 0W-30 |
| Oil Capacity (with filter) | 5.5 quarts |
Note: After refilling, always check the oil level.
Drain Plug Torque Specification
| Component | Torque Value |
|---|---|
| Oil Drain Plug | 18 ft/lbs |
Maintenance Tip: Always replace the drain plug seal when performing an oil change.
Oil Filter & Air Filter Information
No specific AMSOIL filter recommendations are available for this vehicle in the provided source data. Owners should consult their owner’s manual or a certified technician to ensure compatibility with the N47D20 B engine.
Transmission and Cooling System Maintenance
Automatic Transmission Fluid (ATF)
For vehicles equipped with the 8-speed automatic transmission (GA8HP45Z….SL093), use the following specifications:
| Parameter | Specification |
|---|---|
| Total Fill Capacity | 9 quarts |
Coolant Specifications
The cooling system requires a capacity of 8.1 quarts. AMSOIL offers both pre-mix and concentrated options:
- AMSOIL Passenger Car & Light Truck Antifreeze & Coolant: An ethylene glycol 50/50 pre-mix formulation.
- AMSOIL Propylene Glycol Antifreeze and Engine Coolant: A concentrated formula that requires mixing with distilled or high-quality water.
Both products are designed to be phosphate-, nitrate-, nitrite-, silicate-, borate-, and amine-free.
Common diesel oil-related concerns and how AMSOIL products may help
| Concern | Why it matters | AMSOIL Product | How it may help | Limitation |
|---|---|---|---|---|
| Dirty Injectors | Can cause poor performance and smoke. | ADFPCN-EA | Cleans dirty injectors and restores power/torque. | Diagnosis or repair may be required for mechanical failure. |
| Low Cetane Levels | Affects combustion and startability. | ACBCN-EA | Increases cetane up to 8 points and improves idle. | Does not repair damaged fuel systems. |
| Cold Weather Gelling | Can lead to fuel filter icing or wax settling. | ADDCN-EA | Lowers cold filter-plugging point (CFPP) by up to 40°F. | Does not fix a broken fuel heater. |
Diesel maintenance notes for this vehicle
Owners of the N47D20 B engine should prioritize diesel-specific upkeep, including monitoring fuel system integrity and turbocharger health. Because modern BMW diesels utilize complex emissions components like DPF and EGR systems, maintaining high-quality lubrication and fuel quality is essential to prevent soot loading and maintain system efficiency.
Common maintenance concerns for this vehicle
Based on manufacturer communications, owners should be aware of the following:
- EGR System: Potential internal leaks in the EGR cooler can lead to coolant mixing with diesel soot.
- Driveline: The constant-velocity joint between the transfer case and rear drive shaft may require inspection.
- Fuel System: Regular monitoring of fuel system integrity is recommended for all diesel engines.
Recall, TSB, and manufacturer communication notes
NHTSA research indicates several important recalls for the 2016 BMW 328d:
- EGR Module/Cooler: A recall (Campaign 18V755000) was issued because internal leaks in the EGR cooler could cause coolant to mix with soot, potentially leading to an intake manifold fire risk.
- Constant-Velocity Joint: A recall (Campaign 20V185000) addressed potential damage to the CV joint that transfers power between the transfer case and rear drive shaft, which could result in loss of power to the rear wheels.
- Fuel System: Research notes a recall related to the diesel fuel system (Campaign 21V907000).
Important: Always verify open recalls by checking your specific VIN through BMW customer service or an authorized dealer.
About this vehicle
The 2016 BMW 328d is a diesel-powered variant of the sixth-generation BMW 3 Series, part of the F30 (sedan), F31 (wagon/Touring), and F34 (Gran Turismo) chassis lineup. This generation was produced between October 2011 and 2019 and represents a compact executive car designed to balance premium features with high fuel efficiency.
At its heart is the N47D20 B engine, a 2.0L 4-cylinder turbocharged diesel powertrain. This engine family is known for providing a specific diesel alternative within the F30 lineup, catering to drivers who prioritize long-distance commuting and high-efficiency cruising. While many contemporary 3 Series models transitioned toward gasoline or hybrid configurations, the 328d remains a notable choice for diesel enthusiasts.
Maintenance for this vehicle often focuses on specialized diesel requirements. Owners should be mindful of turbocharger health and emissions system upkeep, including components like the Diesel Particulate Filter (DPF) and Exhaust Gas Recirculation (EGR) valve. Additionally, as the F30 generation was notable for transitioning to electric power steering, chassis inspections should account for this change from previous hydraulic systems.
Common questions about this vehicle’s diesel oil and maintenance
How much oil does my 2016 BMW 328d take?
The engine requires 5.5 quarts of oil when performing a service that includes the filter replacement.
What is the correct oil viscosity for the N47D20 B engine?
The AMSOIL lookup recommends a viscosity of 0W-30 for all temperatures.
Can I use any diesel additive in my BMW?
While additives like ADFPCN-EA are designed for diesel engines, always ensure they are compatible with your specific emissions equipment.
What should I do if my BMW has an EGR recall?
If your vehicle is part of the EGR cooler recall, BMW will inspect and replace the component or the intake manifold free of charge. Contact BMW customer service to verify.
Does the 328d require special transmission fluid?
Yes, for the 8-speed GA8HP45Z transmission, a total fill capacity of 9 quarts is required using compatible fluids like ATLPK-EA.
How often should I change my coolant?
While specific intervals vary, AMSOIL products like ANTPC1G-EA provide protection for up to 150,000 miles or 5 years.
Disclaimer: Information provided is based on available source data. Always consult your owner’s manual and a certified technician before performing maintenance.