{"id":465,"date":"2026-06-14T05:07:33","date_gmt":"2026-06-14T09:07:33","guid":{"rendered":"https:\/\/www.worldsbestdieseloil.com\/oil-guide\/2014-ram-promaster-3500-3-0l-4-cyl-diesel-turbo-maintenance-guide\/"},"modified":"2026-06-14T05:07:33","modified_gmt":"2026-06-14T09:07:33","slug":"2014-ram-promaster-3500-3-0l-4-cyl-diesel-turbo-maintenance-guide","status":"publish","type":"post","link":"https:\/\/www.worldsbestdieseloil.com\/oil-guide\/2014-ram-promaster-3500-3-0l-4-cyl-diesel-turbo-maintenance-guide\/","title":{"rendered":"2014 Ram ProMaster 3500 3.0L Diesel Oil & Maintenance Guide"},"content":{"rendered":"
\n
\n
\"AMSOIL
AMSOIL diesel oil guide for trucks, vans, SUVs and diesel engines<\/figcaption><\/figure>\n

For the 2014 Ram ProMaster 3500 equipped with the 3.0L 4-cylinder (Engine Code D Exg 2) diesel turbo engine, the required oil viscosity is 5W-30. The engine oil capacity is 9.5 quarts when performing a change with a new filter. AMSOIL recommends using AMSOIL 5W-30 100% Synthetic Diesel Oil<\/a> (DP530QT-EA<\/a>) for outstanding protection in this diesel application.<\/p>\n

What oil does a 2014 Ram ProMaster 3500 3.0L Diesel take?<\/h2>\n

The 2014 Ram ProMaster 3500 with the 3.0L 4-cylinder diesel engine requires an oil viscosity of 5W-30 for all temperature ranges. The AMSOIL lookup identifies the oil grade as SEO54. For this application, AMSOIL recommends their 5W-30 100% Synthetic Diesel Oil.<\/p>\n

AMSOIL product recommendations<\/h2>\n

Based on the AMSOIL lookup data, here are the recommended fluids and additives for your 2014 Ram ProMaster 3500 diesel engine and drivetrain components.<\/p>\n

Engine Oil & Filter<\/h3>\n
\n\n\n\n
Product Name<\/th>\nPart Code<\/th>\n<\/tr>\n
AMSOIL 5W-30 100% Synthetic Diesel Oil<\/td>\nDP530QT-EA<\/a><\/td>\n<\/tr>\n<\/table>\n<\/div>\n

Note:<\/strong> No specific oil filter recommendations are available from the source data.<\/p>\n

Coolant & Antifreeze<\/h3>\n
\n\n\n\n\n
Product Name<\/th>\nPart Code<\/th>\n<\/tr>\n
AMSOIL Passenger Car & Light Truck Antifreeze & Coolant<\/td>\nANTPC1G-EA<\/a><\/td>\n<\/tr>\n
AMSOIL Propylene Glycol Antifreeze and Engine Coolant<\/td>\nANT1G-EA<\/a><\/td>\n<\/tr>\n<\/table>\n<\/div>\n

Transmission Fluids<\/h3>\n
\n\n\n\n\n\n
Component<\/th>\nProduct Name<\/th>\nPart Code<\/th>\n<\/tr>\n
Automatic (62TE)<\/td>\nAMSOIL Signature Series Multi-Vehicle ATF<\/td>\nATFPK-EA<\/a><\/td>\n<\/tr>\n
Automatic (62TE)<\/td>\nAMSOIL OE Multi-Vehicle ATF<\/td>\nOTFQT-EA<\/a><\/td>\n<\/tr>\n
Manual (MT40)<\/td>\nAMSOIL 75W-90 Manual Transmission &amp; Transaxle Gear Lube<\/a><\/td>\nMTGPK-EA<\/a><\/td>\n<\/tr>\n<\/table>\n<\/div>\n

Brake & Steering Fluids<\/h3>\n
\n\n\n\n\n
Application<\/th>\nProduct Name<\/th>\nPart Code<\/th>\n<\/tr>\n
Clutch\/Brake<\/td>\nAMSOIL DOT 3 and DOT 4 100% Synthetic Brake Fluid<\/td>\nBFLVCN-EA<\/a><\/td>\n<\/tr>\n
Power Steering<\/td>\nAMSOIL 100% Synthetic Multi-Vehicle Power Steering Fluid<\/td>\nPSFCN-EA<\/a><\/td>\n<\/tr>\n<\/table>\n<\/div>\n

Diesel Fuel Additives<\/h3>\n
\n\n\n\n\n
Product Name<\/th>\nPart Code<\/th>\n<\/tr>\n
AMSOIL Diesel Injector Clean Fuel Additive<\/td>\nADFPCN-EA<\/a><\/td>\n<\/tr>\n
AMSOIL Diesel Cetane Boost Fuel Additive<\/td>\nACBCN-EA<\/a><\/td>\n<\/tr>\n<\/table>\n<\/div>\n

Engine Oil Specifications and Capacities<\/h3>\n

When performing maintenance, ensure you adhere to the following capacities and torque requirements:<\/p>\n

\n\n\n\n\n\n
Specification<\/th>\nValue<\/th>\n<\/tr>\n
Oil Viscosity<\/td>\n5W-30 (All TEMPS)<\/td>\n<\/tr>\n
Oil Capacity (with filter)<\/td>\n9.5 quarts<\/td>\n<\/tr>\n
Oil Drain Plug Torque<\/td>\n33 ft\/lbs<\/td>\n<\/tr>\n<\/table>\n<\/div>\n

Maintenance Note:<\/strong> Always install a new washer on the drain bolt and only use an OE drain plug. After refilling, always check the oil level.<\/p>\n

How much transmission fluid does it take?<\/h2>\n

Transmission fluid requirements vary depending on whether you have an automatic or manual configuration. For the 6-speed 62TE automatic transmission, the total fill capacity is 9 quarts, while the initial fill is 5.5 quarts.<\/p>\n

Manual Transmission Specifications<\/h3>\n

For vehicles equipped with the MT40 manual transmission (requiring GL-4 75W-85 all temps), note that synthetic fluid is required. The capacity for the transmission portion is 6.1 pints.<\/p>\n

\n\n\n\n\n
Component<\/th>\nTorque Specification<\/th>\n<\/tr>\n
Manual Transmission Fill Plug<\/td>\n7 ft\/lbs<\/td>\n<\/tr>\n
Manual Transmission Drain Plug<\/td>\n37 ft\/lbs<\/td>\n<\/tr>\n<\/table>\n<\/div>\n

What is the coolant capacity for this diesel engine?<\/h2>\n

The cooling system for the 2014 Ram ProMaster 3500 has a total capacity of 12.7 quarts. Maintaining proper coolant levels and quality is vital for heavy-duty commercial applications.<\/p>\n

\n\n\n\n\n
Coolant Type<\/th>\nNotes<\/th>\n<\/tr>\n
AMSOIL Passenger Car & Light Truck<\/td>\nEthylene glycol 50\/50 pre-mix formulation.<\/td>\n<\/tr>\n
AMSOIL Propylene Glycol<\/td>\nConcentrated \u2013 requires mixing with distilled or high-quality water.<\/td>\n<\/tr>\n<\/table>\n<\/div>\n

Diesel maintenance notes for this vehicle<\/h2>\n